Difference between revisions of "Configure SAS Adapter for RAID - BL8x0"
From jasonhoss.com
(Created page with "* Download the saupdate.efi file for your drive controller and save to bootable media (USB, etc) * Reboot server and bring up the EFI shell *") |
|||
| Line 1: | Line 1: | ||
| + | Changing the mode of the disk controller in a BL8x0 Itanium server requires the saupdate.efi binary to properly set the mode from HBA to RAID. To change the mode of the disk controller, follow these steps: | ||
| + | |||
* Download the saupdate.efi file for your drive controller and save to bootable media (USB, etc) | * Download the saupdate.efi file for your drive controller and save to bootable media (USB, etc) | ||
* Reboot server and bring up the EFI shell | * Reboot server and bring up the EFI shell | ||
| − | * | + | * Once the system is at the EFI shell, look through the devices detected by the system and change to that volume so that the saupdate.efi binary is accessible. For example, if the removable USB drive is detected at fs1, type |
| + | |||
| + | Shell:> fs1: | ||
| + | |||
| + | fs1:> | ||
Revision as of 10:32, 11 January 2011
Changing the mode of the disk controller in a BL8x0 Itanium server requires the saupdate.efi binary to properly set the mode from HBA to RAID. To change the mode of the disk controller, follow these steps:
- Download the saupdate.efi file for your drive controller and save to bootable media (USB, etc)
- Reboot server and bring up the EFI shell
- Once the system is at the EFI shell, look through the devices detected by the system and change to that volume so that the saupdate.efi binary is accessible. For example, if the removable USB drive is detected at fs1, type
Shell:> fs1: fs1:>
